Mounts for you Bow FencePro Featherboard when not in use
Mounts for you Bow FencePro Featherboard when not in use
Mounts for you Bow FencePro Featherboard when not in use
Mounts for you Bow FencePro Featherboard when not in use

Bow FencePro Featherboard holders - 3D files

£3.50

The Bow FencePro Featherboard holders are to hold the featherboard’s out of the way when you you are not using them. They slide into the rear track on Bow Xtender fence.

These Featherboard holders are designed specifically for the Bow FencePro Featherboards used on the Bow fence Xtender. If you want a version for the DIY fence system then please message me.

Stl files
You will get a two pairs of STL files including one for both the 24” and 36” inch fence (noted by 36 in the file name) and one for the 46” fence (noted by 46 in the file name). The 24” and 36” fences are slightly tighter in the track than the 46” fence hence two pairs versions of the stl files. In each pair you. will get a different hight mount on the back to accomodate different height fence clearances. The files are identical in all other regards.

The Bow FencePro Featherboard holders are to hold the featherboard’s out of the way when you you are not using them. They slide into the rear track on Bow Xtender fence.

These Featherboard holders are designed specifically for the Bow FencePro Featherboards used on the Bow fence Xtender. If you want a version for the DIY fence system then please message me.

Stl files
You will get a two pairs of STL files including one for both the 24” and 36” inch fence (noted by 36 in the file name) and one for the 46” fence (noted by 46 in the file name). The 24” and 36” fences are slightly tighter in the track than the 46” fence hence two pairs versions of the stl files. In each pair you. will get a different hight mount on the back to accomodate different height fence clearances. The files are identical in all other regards.

Mounting
No hardware is required these slide in to the slot on the rear of the Bow Xtender fence.

Printing STL files

  • Print up on one end

  • Use 3 wall permitters in your slicer settings

  • For added bed adhesion use a 5mm brim.

  • No supports are required when printing

  • You will need to print one for each feather board.

  • Choose the right STL for the size Bow Xtender fence you have.

Watch the video here: ###################

Get Bow FencePRO Featherboard - 2 Pack available here
UK:https://amzn.to/3WGYKFm
USA: https://amzn.to/4hJd5sG

These featherboard’s are the best out there in my opinion!

This video is part one of two explaining the Bow XT Xtender fence upgrades. Part two will include upgrades that work for the Bow Xt Xtender fence and the DIY tablesaw fence system from my last video.